Table of Contents
Advertisement
Planning use
3.1
Overview
3.1
Introduction
This section describes the first steps after unpacking, the permitted mounting positions and
the fixation. This section describes the necessary considerations for EMC.
Field of application
The Panel PC is an industry-standard PC platform for demanding tasks in the field of PC-
based automation. The Panel PC is designed for on-site use on the machine, installed for
example in:
• Control cabinets
• Swivel arms
• In consoles
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
Note
In the following, the term "control cabinet" also refers to rack, mounting rack, switchboard,
operator panel and console. The term "device" represents the Panel PC and its variants.
3
3-1
Advertisement
Table of Contents
