Table of Contents
Advertisement
Integration in TIA
9.1
Industrial communications
9.1
Introduction
The following options are available for integrating the device in existing or planned system
environments and networks.
Ethernet
The integrated Ethernet interface can be used for communication and for data exchange with
automation devices such as SIMATIC S7.
You need a suitable software package for this. STEP7, WinCC, ProTool, WinCC flexible,
WinAC, SIMATIC NET.
PROFIBUS / MPI
The potentially isolated Profibus interface can be used to connect distributed field devices or
to couple with SIMATIC S7.
You require suitable software for this: STEP7, WinCC, ProTool, WinCC flexible, WinAC,
SIMATIC NET.
Profinet
Additional information
For further information, refer to the catalog and to the online ordering system of Siemens
A&D.
Internet address: https://mall.ad.siemens.com
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
9
9-1
Advertisement
Table of Contents
