Table of Contents
Advertisement
Planning use
3.3 Make note of identification data
3.3
Make note of identification data
3.3
Procedure
1. Write down the Microsoft Windows product key of the Certificate of Authenticity COA in
2. Write down the manufacturer's number SVP and the order number , e.g. "6AV782...", in
Figure 3-1
3. Enter the Ethernet address of the device: The Ethernet address is located in the "Main"
Identification
1
Microsoft Windows Product Key
2
SVP number
3
Order number
10
Ethernet address (MAC address)
3-4
the table at the end of this section. The product key can be found on the back of the
device. You will need the product key during the reinstallation of the operating system.
the table. If repairs are necessary, the device can be identified by the service center on
the basis of the SVP number and order number.
Both numbers can be found on the rating plate attached to the side of the device where
the power unit is located.
Rating plate
menu of the BIOS setup, "Hardware Options > Ethernet Address."
Number
Operating Instructions, Release 04/2006, A5E00798484-01
SIMATIC Panel PC 577
Advertisement
Table of Contents
