Subprograms and Program Section Repeats | Any desired NC program as subprogram
9.4
Any desired NC program as subprogram
Overview of the soft keys
When you press the PGM CALL key, the control displays the
following soft keys:
Soft key
Function
Call an NC program with PGM CALL
Select a datum table with SEL TABLE
Select a point table with SEL PATTERN
Select a contour program with SEL CONTOUR
Select an NC program with SEL PGM
Call the last selected file with CALL SELECTED
PGM
Select any NC program with SEL CYCLE as a fixed
cycle
Further information:
Manual
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Cycle Programming User's
9
351