Entering Miscellaneous Functions M And Stop; Fundamentals - HEIDENHAIN TNC 620 User Manual

11
11.1 Entering miscellaneous functions M and
STOP

Fundamentals

With the control's miscellaneous functions—also called M
functions—you can affect:
the program run, e.g. a program interruption
the machine functions, such as switching spindle rotation and
coolant supply on and off
the path behavior of the tool
You can enter up to four M (miscellaneous) functions at the end of
a positioning block or in a separate block. The control displays the
following dialog question: Miscellaneous function M ?
You usually enter only the number of the miscellaneous function
in the programming dialog. Some miscellaneous functions can be
programmed with additional parameters. In this case, the dialog is
continued for the parameter input.
In the Manual operation and Electronic handwheel operating
modes, the M functions are entered with the M soft key.
468
Miscellaneous Functions | Entering miscellaneous functions M and STOP
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017