HEIDENHAIN TNC 620 User Manual page 399

Programming Q Parameters | Additional functions
Group Gruppen-
name nummerID
Coordinate transformations
210
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Systemdaten- Index
nummer
oversize and
oversize from
TOOL CALL
3 1 = without
oversize 2 =
with oversize
3 = with
oversize and
oversize from
TOOL CALL
6 Tool no.
1 -
2 -
3 -
4 Axis
5 Rotary axis
6 -
7 -
8 QL parameter
no.
Description
Rounding radius R2
Tool length
Index 0= active tool
Basic rotation (manual)
Programmed rotation
Active mirror axis. Bits 0 to 2 and 6 to 8:
Axes X, Y, Z and U, V, W
Active scaling factor
Index: 1 - 9 (X, Y, Z, A, B, C, U, V, W)
3D-ROT
Index: 1 - 3 (A, B, C)
Tilt working plane in Program Run operating
modes
0 = Not active
–1 = Active
Tilt working plane in Manual operating modes
0 = Not active
–1 = Active
Angle of misalignment between spindle and
tilted coordinate system.
Projects the angle specified in the QL
parameter from the input coordinate system
to the tool coordinate system. If IDX is
omitted, the angle 0 is used for projection.
10
399