Displaying Externally Generated Files On The Control; Data Backup - HEIDENHAIN TNC 620 User Manual

4

Displaying externally generated files on the control

The control features several additional tools which you can use to
display the files shown in the table below. Some of the files can
also be edited.
File types
PDF files
Excel tables
Internet files
Text files
Graphics files
Further information:
file types", page 184

Data backup

HEIDENHAIN recommends backing up new programs and files
created on the control to a PC at regular intervals.
The TNCremo data transmission freeware from HEIDENHAIN is a
simple and convenient method for backing up data stored on the
control.
You can also backup files directly from the control.
information: "Backup and restore", page 112
You additionally need a data medium on which all machine-
specific data, such as the PLC program, machine parameters,
etc., are stored. Ask your machine manufacturer for assistance, if
necessary.
Take the time occasionally to delete any unneeded files
so that the control always has enough hard-disk space
for system files (such as the tool table).
170
Type
pdf
xls
csv
html
txt
ini
bmp
gif
jpg
png
"Additional tools for management of external
Fundamentals, File Management | File management: Basics
Further
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017