HEIDENHAIN TNC 620 User Manual page 263

Tools | Tool management (option number 93)
You can edit the tool data only in the form view. To
activate the form view, press the FORM FOR TOOL soft
key or the ENT key for the currently highlighted tool.
If you use the tool management without a mouse, then
you can activate and deactivate functions with the -/+
key.
In the tool management, use the GOTO key to search for
the tool number or pocket number.
In addition, you can perform the following functions by mouse:
Sorting function: You can sort the data in ascending or
descending order (depending on the active setting of the soft
key) by clicking a column of the table head.
Arrange columns. You can arrange the columns in any sequence
you want by clicking a column of the table head and then
moving it with the mouse key pressed down. The control does
not save the current column sequence when you exit the tool
management (depending on the active setting of the soft key).
Show miscellaneous information in the form view: The control
displays tool tips when you leave the mouse pointer on an
active entry field for more than a second and when you have set
the EDIT ON/OFF soft key to ON
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
6
263