Opening A New Program/File Management - HEIDENHAIN TNC 620 User Manual

First Steps with the TNC 620 | Programming the first part

Opening a new program/file management

Press the PGM MGT key
The control opens the file manager.
The file management of the control is arranged
much like the file management on a PC with
Windows Explorer. The file management enables
you to manage data in the control's internal
memory.
Use the arrow keys to select the folder in which
you want to open the new file
Enter any desired file name with the extension
.H
Press the ENT key
The control asks you for the unit of measure for
the new program.
Select the unit of measure: Press the MM or
INCH soft key
The control automatically generates the first and last blocks of the
program. Afterwards you can no longer change these blocks.
Further information on this topic
File management
Further information:
page 171
Creating a new program
Further information:
page 154
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
"Working with the file manager",
"Creating and writing programs",
1
67