Repeating Graphic Simulation; Tool Display - HEIDENHAIN TNC 620 User Manual

18

Repeating graphic simulation

A part program can be graphically simulated as often as desired. To
do so you can reset the graphic to the workpiece blank.
Soft key

Tool display

Regardless of the operating mode, you can also show the tool
during the simulation.
Soft key
The control displays the tool in various colors:
Red: Tool is in effect
Blue: Tool is retracted
708
Function
Display the unmachined blank in the Program
run, single block and Program run, full
sequence operating modes
Display the unmachined blank in the Test Run
operating mode
Function
Program run, full sequence / Program run,
single block
Test Run
Test Run and Program Run | Graphics (option 20)
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017