Upgrading The Computer
Warranty Warning
Please check with your
service
representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
6
Figure 6 - 2
Component Bay
Cover Removal
6 - 4 Removing/Replacing the Component Bay Cover
Removing/Replacing the Component Bay Cover
1.
Turn off the computer, and turn it over and remove the battery.
2.
Slide the latch
in the direction of the arrow.
1
3.
Slide the latch
in the direction of the arrow, and hold it in place.
2
4.
Carefully slide the cover in the direction of the arrow
on the case
, and then lift the cover
4
5.
When reinserting the cover align the markers on the case
then slide the cover until it clicks into place.
2
4
3
4
3
off the computer.
5
1
4
to align with the markers
and cover first, and
4
5