Table of Contents
Advertisement
Removing the 2nd (7mm) HDD from the Caddy Bay
1. Turn off the computer, turn it over to remove the battery
-
9).
2. Carefully pull the caddy bay
3. Remove screws
-
from the bottom of the caddy bay
3
6
4. Slide the 2nd (7mm) hard disk in the direction of arrow
5. Lift the 2nd (7mm) hard disk
6. Reverse the process to install a new 7mm HDD.
a.
1
b.
3
4
6
5
(page 2 -
out of the bay at point
(Figure
1
2
(Figure
(Figure 7c
7
out of the bay
(Figure 7d
)
.
8
c.
2
Note that the caddy bay only
supports 7.0mm (H) hard
disks.
5), bottom cover
(page 2 -
6) and ODD
7a).
7b).
).
d.
7
Removing the 2nd (7mm) HDD from the Caddy Bay 2 - 11
Disassembly
Figure 7
(page 2
2nd (7mm) HDD
Removal
a. Pull out the caddy bay.
b. Remove the screws.
c. Slide the 7mm HDD out
of the bay.
d. Lift the 7mm HDD out of
the bay.
8
1. Caddy Bay
8. 2nd (7mm) HDD
• 4 Screws
Advertisement
Table of Contents
