Removing The Lcd Back Cover (S3100M) - Clevo S3100 Service Manual

Disassembly

Removing the LCD Back Cover (S3100M)

1. Turn off the computer, and turn the computer over to remove the battery
2. Open the LCD and carefully remove the rubber screw covers
them aside
3. Remove screws
4. Carefully slide the cover forward in the direction of the arrows
5. Remove the LCD back cover
a.
2 - 17
(Figure 13a).
3 & 4 from the front cover
7 (Figure
1
3

Rubber Screw Covers
After removing the rubber screw covers, place them on a
clean dry surface (or attach them to the front cover itself) in
order to prevent loss of adhesive.
(page 2 -
1 2
& (2 corner rubber screw covers only) and set
(Figure 13a).
5 6
& as illustrated below
13c).
b.
2
4
c.
5).
(Figure 13b).
5 6
7
Figure
LCD Back
Removal (S3
a. Remove the r
vers and screw
b. Slide the cover
c. Remove the
cover.

7. LCD Back C
• 2 Screws