Docking Station Ports & Jacks - Clevo W130EW User Manual

Docking Station Guide
Docking Station Ports & Jacks
The following will give a quick description of the interface (ports & jacks) which allow your docking station and
computer to communicate with external devices, connect to the internet etc. When the notebook is docked to the
docking station all the ports on the docking station will function, however only some of the ports on the notebook
will function (see the note alongside each item for specific information)..
Item
COM/RS232 Serial Port
DC-In Jack
DVI-D Out Port
E - 18 Docking Station Ports & Jacks
Description
The COM/serial is a communication interface for data transfer,
through which information transfers in or out one bit at a time.
This port can be used to connect the computer to devices such
as terminals and peripherals.
Plug the supplied AC/DC adapter into this jack to power your
docking statio and docked computer.
The DVI-D Out (Digital Visual Interface-Digital) Port is a video
connector interface supporting digital displays only. This allows
you to connect an external monitor, TV or Flat Panel Display etc.
as a display device by means of a DVI-D compatible cable.
Note
This port is supported in the
Windows environment and
at the DOS prompt, however
there is no COM mouse
support.
Use only the docking
station's AC/DC adapter
plugged-in to the docking
station's DC-In jack to power
the computer.