Removing The Processor; Remove The Component Bay Cover; Remove The Processor - Clevo M520G Service Manual

Disassembly

Removing the Processor

Figure 4
Processor Removal
1. Turn off the computer, and turn it over, remove the battery
(page 2 -
a. Remove the screws in
2. Remove screws
the order indicated.
3. Carefully lift the heat sink
b. Remove the heat sink.
a.
4. Heat Sink
• 3 Screws
2 - 8 Removing the Processor
7).
- (Figure a) from the heat sink in the order indicated on the label.
1 3
(Figure b) up off the computer.
4
1
3
2
(page 2 - 5) and remove the component bay cover
b.
4