Removing The Hinge Cover - Clevo PD70PNT Service Manual

Removing the Hinge Cover

1. Turn off the computer, remove the battery
2. The hinge cover will be visible at point
3. Remove the screw (Figure
2
4. Slide the hinge cover out to a short distance
3
5. Carefully lift the hinge cover upward by 10-20 degrees as shown to remove it from the computer.
4
3
2
b.
1
(page 2 - 5).
.
1
14a).
(Figure 14b).
4
a. 4
3
2
1
Removing the Hinge Cover 2 - 19
Disassembly
Figure 14
Hinge Cover
Removal
a. Remove the screw.
b. Slide the hinge cover
out.
c. Carefully lift the hinge
cover upward as shown.

3.Hinge Cover
• 1 Screw