Removing The Lcd Back Cover (B5130M) - Clevo B5130M Service Manual

Removing the LCD Back Cover (B5130M)

1. Turn off the computer, and turn the computer over to remove the battery
2. Open the LCD and carefully remove the upper rubber screw covers
and set them aside (Figure 13a).
3. Remove screws & from the front cover
3 4
4. Carefully slide the cover forward in the direction of the arrows
5. Remove the LCD back cover
a.
1
3

Rubber Screw Covers
After removing the rubber screw covers, place them on a
clean dry surface (or attach them to the front cover itself) in
order to prevent loss of adhesive.
(Figure 13a).
5
(Figure 13c).
7
2
4
(page 2 - 5).
& (2 corner rubber screw covers only)
1 2
& as illustrated below (Figure
6
b.
5
c.
7
Removing the LCD Back Cover (B5130M) 2 - 17
Disassembly
Figure 13
LCD Back Cover
Removal (B5130M)
a. Remove the rubber co-
vers and screws.
13b).
b. Slide the cover forward.
c. Remove the LCD back
cover.
6

7. LCD Back Cover
• 2 Screws