Table of Contents
Advertisement
Modules & Options
7
Figure 7 - 72
TPM State
(Enabled)
7 - 102 Trusted Platform Module
Enabling & Activating TPM
1.
Restart the computer.
2.
Enter the Aptio Setup Utility pressing F2 during the POST/startup.
3.
Use the arrow keys to select the Security menu
4.
Select TPM Configuration and press Enter.
5.
Select Security Device Support and press Enter, select Enable and press Enter.
6.
Select TPM State, press Enter and select Enabled to change the TPM state to
enabled. You will then need to press F4 to save the changes and restart the
computer.
7.
As the computer restarts press F2 to enter the BIOS again and go to the TPM
Configuration menu.
Advertisement
Table of Contents
