Table of Contents
Advertisement
Attaching Other Displays
If you prefer to use a monitor or flat panel display, connect it to the external monitor
port or HDMI-Out port on the left of the computer.
To Clone Displays:
1.
Attach your display to the external monitor port or HDMI-Out port, and turn it on.
2.
Go to the Intel(R) G&M control panel and click Display > Multiple Displays.
3.
Click Operating Mode and select Clone Displays from the menu.
4.
Click Apply, and OK to confirm the settings change.
5.
You can switch the Primary/Secondary Display from the menu.
Video Driver Controls
Multiple Display
At least one other dis-
play must be attached in
order to view Multiple
Display selection op-
tions.
General Settings
Click General Settings
to access settings the
options for any attached
display.
Figure C - 3
Display > Multiple
Displays (Clone)
Attaching Other Displays C - 5
C
Advertisement
Table of Contents
