Table of Contents
Advertisement
3rd Party Bluetooth (V4.0) Combo Driver Installation
Note this driver is required for the 3rd Party combo Bluetooth and WLAN module
(Bluetooth V4.0) only.
1. Before installing the driver make sure the Bluetooth module is powered
on (use Fn + F12 key combination), then insert the Device Drivers & Utili-
ties + User's Manual disc into the CD/DVD drive. If a Found New Hard-
ware window appears, click Cancel in all windows that appear, and then
proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 5.Install Combo BT Driver > Yes.
4. Click Next (if a prompt appears to ask you to turn the Bluetooth power on,
press the Fn + F12 key combination to do so, otherwise the driver will not
be installed).
5. Click Finish to restart the computer.
6. See
"Standard Bluetooth Configuration in Windows 7" on page 7 - 89
configuration instructions. See
page F -
41.
"Bluetooth Settings (Windows 8)" on
Bluetooth & WLAN Combo Module 7 - 87
Modules & Options
for
7
Advertisement
Table of Contents
