3.
Gently pull the two release latches on the sides of the memory socket in the
direction indicated by the arrows (
4.
The RAM module will
Single Memory Module
Installation
If your computer has a single memory
module, then insert the module into the
Channel 0 (JDIMM1) socket. In this
case this is the lower memory socket
(the socket closest to the mainboard).
)
&
in
Figure 6 -
2
3
2
3
pop-up, and you can remove it.
4
Upgrading The Computer
10.
4
Upgrading the System Memory (RAM) 6 - 11
Figure 6 - 10
RAM Module
Release Latches
Contact Warning
Be careful not to touch
the metal pins on the
module's
connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module's
perfor-
mance.
Figure 6 - 11
RAM Module
Removal
6