Removing The Hard Disk(S) In The Secondary Hdd Bay - Clevo P570WM Service Manual

Removing the Hard Disk(s) in the Secondary HDD Bay

1. Turn off the computer, and turn it over and remove the battery.
2. The secondary hard disk bay is located under the battery.
3. Remove screws - from the secondary hard disk assembly.
1 4
4. Grip the tab and slide the hard disk assembly in the direction of the arrow
5
5. Lift the hard disk assembly
7
6. Remove the screws - to release the hard disk
8 11
7. Reverse the process to install any new hard disk(s).
a.
b.
out of the compartment.
from the case
12
c.
d.
1 2
10
5 6
4 3
.
6
.
13
7
8
9
13
11
12
Removing the Hard Disk Drive 2 - 9
Disassembly
Figure 5
Secondary HDD
Assembly Removal
a. Remove the battery.
b. Remove the screws and
slide the secondary hard
disk assembly in the di-
rection of the arrow.
c. Lift the secondary hard
disk assembly out off
the computer.
d. Remove the screws to
release the hard disk
from the case.

7. Hard Disk Assembly
12. Hard Disk Case
13. Hard Disks
• 8 Screws