Interface M-Eth0 - HP MSR Series Command Reference Manual

system-package: Specifies the name of the system image, a case-insensitive string of 1 to 63 characters.
This file must be saved in the root directory of the current MPU's storage medium, with the extension .bin.
The file name must indicate the storage medium and cannot contain slot information, for example,
cfa0:/startup-system.bin. (On an MSR4000.)
Usage guidelines
When you execute this command, the system modifies the main startup software image set to include
only the boot image and system image so the device can reboot correctly.
After the Comware system is started, you can load feature and patch images. For more information, see
the chapters about software upgrade and ISSU in Fundamentals Configuration Guide.
Examples
# Load a system image and start the Comware system.
<boot> install load flash:/system.bin
Check package flash:/system.bin ...
Extracting package ...
Loading...
System application is starting...
Set bootargs.
CPIO Length: 0x96e7d8.
cpio=0x96e7d8@0x13000000
CPIO Length: 0x96e7d8.
Starting application at 0x02000000 ..HA_Register OK, ulModuleID = 252772352, ulS
ubID = 6.HA_Register OK, ulModuleID = 254803968, ulSubID = 0.HA_Register OK, ulM
oduleID = 252706816, ulSubID = 0.HA_Register OK, ulModuleID = 255983616, ulSubID
= 2.HA_Register OK, ulModuleID = 256442368, ulSubID = 0.HA daemon start as 1 (b
uild Jul 29 2011 11:50:56).
System service initialization completed, cost 28 seconds.
Autorun service initialization completed, cost 5 seconds.
Ondemand service initialization completed, cost 30 seconds.
Line con1 is available.
Press ENTER to get started.

interface m-eth0

Use interface m-eth0 to enter management Ethernet port view.
Syntax
interface m-eth0
Views
System view
Usage guidelines
In management Ethernet port view, you can assign an IP address to the port and specify a gateway.
192