HP MSR Series Command Reference Manual page 55

Hardware
MSR4000
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Examples
# Display user line information.
<Sysname> display line 0
Idx Type
0 CON 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 4 Command output
Field
Modem
Int
# Display summary information about all user lines.
<Sysname> display line summary
Line type : [CON]
Line type : [AUX]
Line type : [VTY]
2 lines used.
5 lines not used.
Tx/Rx Modem Auth
9600 -
Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a
hyphen (-) is displayed.
Physical port for the line. If there is no physical port for the line or the line is a console line, a
hyphen (-) is displayed.
0:U
1:X
2:UXXX X
(U)
(X)
Value range
aux: 0 to 2
console: 0 to 2
tty: 1 to 432
vty: 0 to 63
Int Location
N - 0/0
47