Display Startup - HP MSR Series Command Reference Manual

#
ftp server enable
#
telnet server enable
#
domain default enable system
#
vlan 1
#
domain system
#
---- More ----
Related commands
reset saved-configuration
•
save
•

display startup

Use display startup to display the names of the current startup configuration file and the next-startup
configuration files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Current startup configuration file is the configuration file that has been loaded. Next-startup
configuration file is the configuration file used at the next startup.
On the MSR4000 router, the standby MPU always uses the same current startup configuration file as the
active MPU. After an active/standby switchover, it is normal that the current startup configuration files on
the MPUs are displayed as NULL. This is because the new active MPU continues to run with the running
configuration rather than rebooting with a startup configuration file.
Examples
# Display names of the startup configuration files on the MSR1000/MSR2000/MSR3000 router.
<Sysname> display startup
Current startup saved-configuration file: cfa0:/startup.cfg
Next main startup saved-configuration file: cfa0:/startup.cfg
Next backup startup saved-configuration file: NULL
164