Copy - HP MSR Series Command Reference Manual

..: Returns to an upper directory. If the current working directory is the root directory, an error message
appears when you execute the cd .. command. No online help information is available for this keyword.
Examples
# Access the test folder after logging in to the device.
<Sysname> cd test
# Return to the upper directory.
<Sysname> cd ..
# On an MSR4000, change to the test folder in the root directory of the active MPU:
1. Display the number of the slot where the standby MPU resides.
<Sysname> display device
Device Name: HP MSR4060
Slot No.
-----------------------------------------------------------------------------
0
1
2
The output shows that the slot number of the standby MPU is 1.
2. Access the root directory of the CF card on the standby MPU.
<Sysname> cd slot1#cfa0:/
3. Change to the test folder in the root directory of the active MPU.
<Sysname> cd cfa0:/test

copy

Use copy to copy a file.
Syntax
In non-FIPS mode:
copy fileurl-source fileurl-dest [ vpn-instance vpn-instance-name ] [ source interface interface-type
interface-number ]
In FIPS mode:
copy fileurl-source fileurl-dest
Views
User view
Predefined user roles
network-admin
Parameters
fileurl-source: Specifies the name or URL of the file to be copied in non-FIPS mode, and specifies the name
of the file to be copied in FIPS mode. If the file resides on an FTP or TFTP server rather than on the device,
specify the URL of the file. Whether a URL is case sensitive depends on the server.
fileurl-dest: Specifies the name or URL of the destination file or directory in non-FIPS mode, and specifies
the name of the destination file or directory in FIPS mode. To copy the source file to an FTP or TFTP server,
Board Type
MPU-100
MPU-100
SPU-300
137
Status Primary
Normal Master
Normal Standby
Normal N/A
SubSlots
0
0
8