Display Scheduler Schedule - HP MSR Series Command Reference Manual

<Sysname> display scheduler reboot
System will reboot at 16:32:00 05/23/2013 (in 1 hours and 39 minutes).
Related commands
scheduler reboot at
•
scheduler reboot delay
•

display scheduler schedule

Use display scheduler schedule to display schedule information.
Syntax
display scheduler schedule [ schedule-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If you do
not specify this option, the command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name
Schedule type
Start time
Last execution time
Last completion time : Tue Dec 27 10:44:47 2013
Execution counts
-----------------------------------------------------------------------
Job name
shutdown
Table 38 Command output
Field
Schedule type
Start time
Last execution time
Last completion
time
: shutdown
: Run once after 0 hours 2 minutes
: Tue Dec 27 10:44:42 2013
: Tue Dec 27 10:44:42 2013
: 1
Description
Execution time setting of the schedule. If no execution time is specified, this field is not
displayed.
Time to execute the schedule for the first time. If no execution time is specified, this field
is not displayed.
Last time when the schedule was executed. If no execution time is specified, this field is
not displayed. If the schedule has never been executed, "Yet to be executed" is displayed
for this field.
Last time when the schedule was completed. If no execution time is specified, this field is
not displayed.
Last execution status
Successful
235