Display Device Manuinfo - HP MSR Series Command Reference Manual

Field
Status
Primary
SubSlots

display device manuinfo

Use display device manuinfo to display the electronic label information of the device.
Syntax
MSR1000/MSR2000/MSR3000:
display device manuinfo [ slot slot-number ]
MSR4000:
display device manuinfo [ slot slot-number [ subslot subslot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. (On an MSR1000, MSR2000 or MSR3000.)
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays the electronic label information of all cards. (On an MSR4000.)
subslot subslot-number: Specifies a subcard by its subslot number. (On an MSR4000.)
Usage guidelines
An electronic label is a profile of a device or card. It contains permanent configuration including the
serial number, manufacturing date, MAC address, and vendor name. The data is written to the storage
component during debugging or testing.
Examples
# On an MSR1000, MSR2000 or MSR3000, display the electronic label information of the device.
<Sysname> display device manuinfo
slot 0
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210235A1A0A129000001
MAC_ADDRESS
MANUFACTURING_DATE
Description
Card status:
•
Absent—The slot is not installed with a card.
•
Fault—The card is faulty and cannot start up.
•
Normal—The card is operating correctly.
MPU status:
•
Standby—The card is the standby MPU.
•
Master—The card is the active MPU.
Maximum number of subcards that the card supports.
: MSR3044
: 000F-E212-3476
: 2013-04-12
222