Remove - HP MSR Series Command Reference Manual

<Sysname> reboot slot 2
Start to check configuration with next startup configuration file, please wait..
.......DONE!
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# On an MSR4000, reboot the interface card in slot 2 by force.
<Sysname> reboot slot 2 force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:y
Now rebooting, please wait...

remove

Use remove to unmount an HMIM module.
Syntax
remove hmimslot slot-number
The following matrix shows the support of MSR routers for the command:
Hardware
MSR1000
MSR2000
MSR3000
MSR4000
Views
User view
Predefined user roles
network-admin
Parameters
slot-number: Specifies an HMIM module by its slot number.
Usage guidelines
CAUTION:
Use this command with caution. This command stops all services provided by the HMIM module.
You cannot display or configure an unmounted HMIM module.
Examples
# Unmount the HMIM module in slot 6.
<sysname> remove hmimslot 6
You can remove the card now!
Command compatibility
No
MSR2004: No
MSR2004-24/MSR2004-48: Yes
Yes
Yes
254