Redirect Passthrough; Redirect Refuse-Negotiation - HP MSR Series Command Reference Manual

Predefined user roles
network-admin
Parameters
port-number: Specifies the number of the Telnet redirect listening port, in the range of 2000 to 50000.
Usage guidelines
The device redirects only Telnet connection requests destined for the Telnet redirect listening port.
Examples
# Set the Telnet redirect listening port number to 3000.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] redirect listen-port 3000
Related commands
• display tcp (Layer 3—IP Services Command Reference)
redirect enable
•

redirect passthrough

Use redirect passthrough to set the forwarding mode to passthrough for redirected Telnet packets.
Use undo redirect passthrough to restore the default.
Syntax
redirect passthrough
undo redirect passthrough
Default
A user line processes Telnet packets to be redirected as defined by the Telnet protocol.
Views
AUX line view, TTY line view
Predefined user roles
network-admin
Usage guidelines
In passthrough mode, a line does not process Telnet packets to be redirected. It forwards the packets to
the destination directly.
Examples
# Set the Telnet packet forwarding mode to passthrough.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] redirect passthrough
Related commands
redirect enable

redirect refuse-negotiation

69