Rule - HP MSR Series Command Reference Manual

undo role feature-group name feature-group-name
Default
Two user role feature groups, L2 and L3, are created.
Views
System view
Predefined user roles
network-admin
Parameters
name feature-group-name: Specifies a feature group name. The feature-group-name argument is a
case-sensitive string of 1 to 31 characters.
Usage guidelines
The L2 feature group includes all Layer 2 feature commands, and the L3 feature group includes all Layer
3 feature commands. These predefined feature groups are not user configurable.
In addition to the predefined feature groups L2 and L3, you can create up to 64 user role feature groups.
After you create a user role feature group, you can use the display role feature command to display the
features available in the system. Then you can use the feature command to add features to the feature
group.
Examples
# Create the feature group 1.
<Sysname> system-view
[Sysname] role feature-group name 1
[Sysname-featuregrp-1]
Related commands
display role feature-group
•
• display role feature
feature
•

rule

Use rule to create or change a user role rule for controlling command or XML element access.
Use undo rule to delete a user role rule.
Syntax
rule number { deny | permit } { command command-string | { execute | read | write } * { feature
[ feature-name ] | feature-group feature-group-name | xml-element [ xml-string ] } }
undo rule { number | all }
Default
A user-defined user role does not have any rules and cannot use any command or XML element.
Views
User role view
29