Scheduler Reboot At - HP MSR Series Command Reference Manual

scheduler reboot at

Use scheduler reboot at to specify the reboot date and time.
Use undo scheduler reboot to remove the reboot schedule configuration.
Syntax
scheduler reboot at time [ date ]
undo scheduler reboot
Default
No reboot date or time is specified.
Views
User view
Predefined user roles
network-admin
Parameters
time: Specifies the reboot time in the format hh:mm. The hh value is in the range of 0 to 23. The mm value
is in the range of 0 to 59.
date: Specifies the reboot date in the format MM/DD/YYYY or YYYY/MM/DD. The YYYY value is in the
range of 2000 to 2035. The MM value is in the range of 1 to 12. The value range for DD varies by
month.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
When the date argument is not specified:
If the reboot time is later than the current time, a reboot occurs at the reboot time of the current day.
•
If the reboot time is earlier than the current time, a reboot occurs at the reboot time the next day.
•
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot delay
and schedule reboot delay commands or configure one of the commands multiple times, the most recent
configuration takes effect.
Examples
# Configure the device to reboot at 12:00 p.m. This example assumes that the current time is 1 1:43 a.m.
on June 6, 2013.
<Sysname> scheduler reboot at 12:00
Reboot system at 12:00:00 06/06/2013 (in 0 hours and 16 minutes). Confirm? [Y/N]:
Related commands
scheduler reboot delay
258