Copy Trace Buffers - HP StorageWorks e1200-160 User Manual

Copy Trace Buffers

Use the following procedure to save copies of the trace buffers:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
Note:
the trace file.
3. Enter the user name and password.
4. Specify binary mode:
5. Specify the filename (with the extension .txt) using the get command.
Network Storage Router e1200-160
ftp <IP address>
where IP address is the address of the router.
The default router IP address is 1.1.1.1.
You will need to specify the directory location where your FTP utility will store
The default user name is
HP recommends that the user name and password be changed from the default
values.
bin
For the current trace buffer, use the following command:
get curtrace.txt
For the previous trace buffer, use the following command:
get prvtrace.txt
and the default password is
root
FTP User Interface
.
password
149