AGFA Drystar AXYS Manual page 7

D AXYS
RYSTAR
Working with Compact flash cards
(CF-card)
The Drystar AXYS is equipped with an external CF-card slot, which is located at
the rear side.
To insert a CF-card in the Drystar AXYS:
1 Hold the CF-card vertically with the connector holes in front of the slot and with
the flat surface pointing to the left. In that case the cut-away (a) and the rim (b)
are pointing to the right.
A
B
2 Insert the CF-card gently into the slot and push it until the unlocking lever
underneath the slot comes out.
60
1
2
Note: If you cannot push the CF-card completely into its position, this
means that you have to turn it 180 degrees (while keeping the connector
holes faced to the slot).
2852 A EN 20070205