AGFA Drystar AXYS Manual page 3

D AXYS
RYSTAR
General display features
The figure below shows how the display is illustrated in this manual:
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
The visible display lines are indicated in the upper zone. The other possible
lines are shown in the lower zone and can be reached by scrolling using the Up/
Down arrow keys on the Keypad.
In the upper right corner, the current printer status is displayed:
In Operator mode, two characters display the print queue status. Refer to
aging the print queue"
In Key-operator mode, two characters are displayed in reverse video to indicate
the current menu- or submenu level (e.g. 'KO' for Key-operator main level).
A warning, an error or a maintenance request is displayed respectively with the
character W, E and M.
56
Visible
Reachable with Up/Down arrow keys
on page 67.
"Man-
2852 A EN 20070205