AGFA Drystar AXYS Manual page 36

On these charts, the following test conditions are also recorded:
The type and serial number of the Drystar AXYS.
The type and emulsion number of the film used to determine the reference val-
ues.
The type of densitometer used.
The time (day, month, year) that the values were established.
2852 A EN 20070205
WARNING: Before you can establish the daily operating levels, the
Drystar AXYS must be switched on for at least 15 minutes and it
must be calibrated as well.
WARNING: Refer to "Switching on the Drystar AXYS"
D AXYS
RYSTAR
on page 48.
89