Deleting Print Jobs - AGFA Drystar AXYS Manual

D AXYS
RYSTAR

Deleting print jobs

When the Drystar AXYS is printing, you can always delete print jobs by entering
the operator menu.
During a print job, the 'print' screen is displayed:
Mod.name
To delete a print job, proceed as follows:
1 Press the Escape key to enter the operator menu.
The 'Operator menu' screen appears:
4 Delete jobs
2 Press the Down key three times, followed by the Confirm key to select 'Delete
jobs'.
A screen appears where you can choose between the option 'All jobs' or one of the jobs
in the print queue:
3 Do one of the following:
•
If you want to delete all jobs at once, press the up/down arrow keys to select 'All jobs',
followed by the Confirm key. Proceed with the next step.
•
If you only want to delete a specific job in the print queue, press the up/down arrow
keys to select the desired print job, followed by the Confirm key. Proceed with the next
step.
4 A screen appears in which you need to confirm your delete request.
Press the Confirm key (YES) to confirm your choice, or the Escape key (NO) to quit
the procedure without any changes.
72
PR
1 2
Note: Only the print queue jobs with a status different from printing (PR) or
calculating (CA) will be shown.
2852 A EN 20070205