Table Of Contents - AGFA Drystar AXYS Manual

D AXYS
RYSTAR
Overview of operator functions
This section focuses on the basic operating principles of the Drystar AXYS. After
reading this chapter, the operator should be able to produce diagnostic usable
hardcopies. No special technical skills are required.
All basic operator functions can be activated directly by pressing a single key on
the keypad.
Function / Task
"Managing the print queue"
"Pausing the print queue"
"Viewing the film count info"
"Viewing the printer status"
"Deleting print jobs"
"Loading films"
66
on page
on page 69
on page
on page
on page 72
on page 76
Description
Jobs that have been received are
put in a print queue, waiting to be
67
printed.
To pause the print queue. The
printer will finish the current print
job, but will not start the next print
job.
To view the number of films left in
70
the trays.
71 To view the current events.
To remove a print job from the
print queue.
Instructions for loading new films
on the printer.
2852 A EN 20070205