Cleaning The Drain Pump And Non-Return Valve - Miele Platinum G 892 Operating Instructions Manual

C_eaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
[] Turn off the dishwasher.
[] Remove the triple filter (see "Cleaning
the filter in the wash cabinet").
[] Use a jug or bowl to scoop water out
of the wash cabinet.
[] Pull out the non-return valve and
rinse well under running water.
[] Tilt the locking clamp to the side.
The drain pump is beneath the
non-return valve (see arrow).
[] Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
[] Carefully refit the non-return valve
and secure it with the locking clamp.
[] Refit and lock the filter in place.
49