Table of Contents
Advertisement
Dealing with Minor Faults
With the aid of the following explan-
atory notes, minor faults can be cor-
rected without contacting the Miele
Service Department.
Any work on the electrical com-
ponents of the appliance should —
only be carried out by a suitably
qualified and competent person.
Faults/possible causes
The dishwasher does not start?
® The door is not properly closed.
® The plug is not properly inserted.
@ Jhe tuse is defective.
The dishes are not clean
@ The dishes are incorrectly loaded.
@ The correct amount of detergent
Was not used,
@® Not enough
water in the wasn
cabinet:
— The
stopcock/faucet
has
not
been opened fully.
- Filter
in the
water
blocked.
@ Water pressure is too low.
(To check the water level, see p.
29).
@ Filters in the wash cabinet are not
clean (see p. 25).
@ Spray arm jets are blocked (see p.
26).
inlet
is
@® Spray
arms
are
hindered
by
dishes stacked too high in the
baskets.
a0
White
residue
on
cutlery
and
dishes
@® Not enough Rinse Aid,
Water
in the wash
cabinet
after
completion of program
@® The outlet hose is kinked.
@ The drain pump or the non-return
valve is blocked,
To clean the drain pump or the non-
return valve see p, 27.
Should
you
still have
difficulties,
please contact your MIELE Dealer or
the MIELE Service Department (see
back
cover
for address)
and
give
Type and Madel of appliance. This
information can be found on the data
plate on inside of door.
Advertisement
Table of Contents
