PRINTING OBJECTS WITH G3D WEB UI
RAISING THE BUILD PLATE
During normal operations, after you print or abort during printing, the build plate
will move up. In other circumstances, there is an option to raise the build plate.
1. Press the < > printer configuration icon on the Web UI index page.
2. Press the <Raise Plate> button.
REMOVING THE BUILD PLATE
Do not remove the VAT before the build plate to ensure that the resin will not
!
drip in the printer.
Wear rubber gloves to prevent skin contact.
Wear safety glasses or goggles for eye protection.
1. Untighten the head stopper. Rotate the head stopper counter clockwise to
remove from the build plate.
45
PDF
Printer Configurations
Printer Wifi
Home Wifi
Raise Plate
HEAD
STOPPER
T-1000