Filling The Vat; Printing - G3D T-1000 Manual

PRINTING OBJECTS WITH G3D WEB UI

FILLING THE VAT

1. Pour resin into the VAT before starting to print.
Never fill up the VAT full. To avoid overflow and spill of resin inside the
! !
printer, VAT should be filled until the max line.

PRINTING

The projector of the printer has a default xy resolution setting of 175 µm. If you
will print an object with a different xy resolution, change the xy resolution of the
projector and adjust the focus of the projector. The resolution of the projector
should always match the resolution of the object.
See "Adjusting the XY resolution of the projector" on page 28.
See "Focusing the projector" on page 32.
1. Press <G3Dit> button to start to print.
Do not stare at the UV light.
The door window is UV protected. It should be closed during normal
operations.
T-1000
SLOWLY
FILL UP THE VAT
Max
Min
26