G3D T-1000 Manual page 27

PRINTING OBJECTS WITH G3D WEB UI
CALIBRATING THE VAT
4. Press <Position build plate> button and <YES> button to confirm.
5. Wait until movement has stopped.
6. Make sure that the VAT reaches the line mark to ensure no misalignment of
build plate surface to VAT.
7. Tighten all calibration levers.
!
Do not overtighten.
LEFT VAT SIDE VIEW
8. Tighten all VAT stoppers only enough to snug them against the VAT. Rotate the
VAT stoppers clockwise.
!
Do not overtighten.
25
VAT
2
1
2
1
LINE MARK
3
4
RIGHT VAT SIDE VIEW
VAT STOPPER
3
4
T-1000