Cleaning The Vat - G3D T-1000 Manual

PRINT CARE AND CLEANING GUIDE
■ Store the resin in a cool and dry place.

CLEANING THE VAT

!
Check the VAT for leaks.
1. Remove resin debris inside the VAT. Be careful when you use the scraper.
Do not leave any scratches inside the VAT.
2. Pour the left over resin to an empty bottle. Use a strainer to separate resin
from any solid particles.
3. Wash and apply mild detergent into VAT.
4. Use a soft sponge to avoid scratches into the VAT which may cause "clouding".
T-1000 50