Updating The G3D Web Ui - G3D T-1000 Manual

GETTING STARTED
1. Push down the wifi reset until the printer shuts down.
2. Push the power button to turn on printer.
3. Search and connect to G3D or Printer Wifi using the default settings.
4. Open the browser. Type the default hostname <g3dprint:8080> in the url box
and press enter to access the Web UI.

UPDATING THE G3D WEB UI

When we update the G3D Web UI, you will receive a notification.
1. Make sure printer is connected to the internet.
2. Press <Update Alert> button.
3. Press <Yes> button to confirm.
4. Printer will shutdown after an update.
5. Push power button to turn on printer.
6. Open the browser and access the Web UI.
New File
+
+
Choose File
Delete File
17
SSID : G3DPrinter
Password : G3D54321
PRINTER'S
WIFI RESET
PDF
INFO
You have 1 new notification
Hardware Address
00-1B-63-84-45-E8
Update Alert Update Alert
IP Address
192.168.0.9:8080
Wifi Address
192.168.0.10
Link Status
Connected
Vendor
Global 3D Systems Inc.
Model
T-1000
T-1000
1