PRINTING OBJECTS WITH G3D WEB UI
ADJUSTING THE XY RESOLUTION OF PROJECTOR
To effectively print an object, the xy resolution setting of the projector should have
the same xy resolution indicated in the info box of G3D Web UI.
Do not open the rear panel while the power is on. Before you remove the
! !
rear panel make sure to touch any metal frame of the printer to avoid
electrostatic discharge damage.
1. Press the power button and hold it down for 5 seconds then release the power
button. Wait until the light goes off.
POWER
BUTTON
2. Turn off main switch located at the back of the printer.
MAIN
SWITCH
T-1000
ON
OFF
G3D
28