G3D T-1000 Manual page 16

GETTING STARTED
CONFIGURING THE WIFI CONNECTIONS
3. A printer configuration box will appear after you select the printer wifi. You
need to type your new SSID, new password and new hostname.
4. Press <Save> button and <Yes> button to confirm.
5. Printer will shutdown after you press the save button.
6. Push the power button to turn on the printer.
7. Press <x> button to close the browser.
8. Search and connect to your <New SSID> from your wifi network.
9. Enter your <New Password> to connect.
10. Open the browser and type your <New Hostname:8080> to access the
Web UI.
New Hostname:8080
T-1000
Printer Wifi Configuration Update
Warning: The printer will shutdown after
clicking the Save button.
Turn on the printer, re open the browser then
access the printer via its hostname.
SSID New SSID
Password New Password
Hostname New Hostname
Save Cancel
Printer Wifi Configuration Update
Warning: The printer will shutdown after
clicking the Save button.
Turn on the printer, re open the browser then
access the printer via its hostname.
SSID New SSID
Password New Password
Hostname New Hostname
Save Cancel
14