Focusing The Projector - G3D T-1000 Manual

PRINTING OBJECTS WITH G3D WEB UI

FOCUSING THE PROJECTOR

It is essential to focus the projector properly after you have adjusted the
xy resolution setting of the projector. Make sure to calibrate the VAT, before you
adjust the focus of the projector.
See "Calibrating the VAT" on page 24.
Be alert of moving mechanism.
!
1. Rotate the head stopper counter clockwise and remove the head stopper
from the assembly.
2. Untighten all (4) four VAT stoppers.
3. Remove the build plate and VAT.
T-1000 32