G3D T-1000 Manual page 25

PRINTING OBJECTS WITH G3D WEB UI
POSITIONING THE BUILD PLATE
3. Press <Yes> button to confirm.
Initial Layer Cure Time
+
30
No. of Initial Layer
#
3
Layers Cure Time
7
Position Build Plate
Cancel
Please confirm to message.
The printer will position the build plate. Wait until all movement has stopped.
(Fig. 4)
FIG. 1
4. Tighten all VAT stoppers only enough to snug them against the VAT. Rotate the
VAT stoppers clockwise.
!
Do not overtighten.
23
Confirm
The Build Plate and VAT will prepare for printing now.
?
The VAT and Build Plate will move to ready position.
Wait till all movement has stopped, you may then add resin and print.
Do you want to prepare the printer?
Yes
FIG. 2
2
1
No
FIG. 3
VAT STOPPER
3
4
PDF
INFO
Filename
Sphere.g3d
XY Pixel Size (µm)
175
Z Layer Thickness (µm)
120
Estimated Time (hh:mm)
01:39:00
Total Layers to Print
589
Total Print Volume (ml)
38
FIG. 4
T-1000