Cleaning Guide; Raising The Build Plate; Removing The Build Plate - G3D T-1000 Manual

CLEANING GUIDE

RAISING THE BUILD PLATE

This procedure is optional. Normally, after printing or aborting, the build plate
will move up and go back to its home position.
1. Press < > cogwheel icon.
2. Press <Raise Plate> button.

REMOVING THE BUILD PLATE

Do not remove the vat before the build plate to ensure that the resin will not
drip inside the printer.
Wear protective gloves.
Wear safety glasses or goggles for eye protection.
1. Remove the build plate locking screw.
T-1000
Printer Configurations
Printer WiFi
Home WiFi
Raise Plate
47